Aurevia 14 Light LED Linear Alabaster Chandelier - Matt Black & Brass

The Aurevia is a 1050mm linear chandelier carrying fourteen natural Spanish alabaster domes suspended at staggered heights from a 1050 x 450mm matt black rectangular ceiling plate. Each dome is supported on a slim brushed brass stem, with integrated LED modules behind the alabaster casting warm 3000K light through the stone and pooling visibly at the small brass disc on the underside of every dome.

The linear format and 3900mm of adjustable cable make this chandelier suited to long dining tables of 8-12 seats, large kitchen islands, hotel reception desks and boardroom tables where the fitting can run parallel to the surface below. Installers can vary the drop of individual domes during fitting to create the staggered, layered arrangement, or set them level for a more uniform line. The matt black plate sits flush to the ceiling and conceals all driver hardware.

Each alabaster dome is cut from natural Spanish stone, so mineral veining and translucency vary between individual pieces — the fitting reads as a collection of related but non-identical elements rather than a manufactured set. The matt black plate, brushed brass stems and discs, and warm-glowing alabaster give the chandelier three distinct material registers without any one finish dominating. At 1050mm long the bar suits tables of roughly 1.8-2.6m in length, leaving the proportional 200-300mm of clearance at each end.

What size table or island does the Aurevia suit?

The bar measures 1050mm long by 450mm wide, which works well above dining tables and kitchen islands of approximately 1.8-2.6m in length. This leaves a proportional 200-300mm of visual clearance at each end of the table.

Can the individual domes be hung at different heights?

Yes. Each of the fourteen domes has its own cable with up to 3900mm of adjustable length, so the drops can be set staggered for a layered look or levelled for a uniform horizontal line during installation.

Is the LED dimmable?

The fitting uses integrated LED modules running at 3000K on 230V mains. Dimmer compatibility depends on the specific dimmer and driver pairing, so please contact us before specifying a dimmer to confirm it will work with this model.

Why does the alabaster look different on each dome?

The domes are cut from natural Spanish alabaster, so veining, mineral patterning and translucency vary between individual pieces. This natural variation is a feature of the stone rather than a manufacturing fault, and becomes most visible once the LEDs are switched on.

Delivery Delivery timing and charges depend on product availability, order size and destination. We will confirm the shipping method, estimated schedule and any applicable charges before dispatch.

Returns If an item arrives damaged or incorrect, keep the packaging, photograph the item and contact SPACEROSS promptly with your order details. Change-of-mind returns are reviewed before return authorization.

To arrange delivery or return support, use our contact page.